UV Cured Pipe Relining

 UV Cured Pipe Relining or UV lined CIPP (Cured in Place Pipe) is the modern no-dig evolution of traditional pipe relining services. Where conventional methods use heat with water and steam, UV cured pipe repair utilises ultraviolet light to cure the resin inside the liner.

The Allpipe Technologies UV relining service is a trenchless solution, which provides no dig pipe repair. Digging can be both expensive and destructive. UV Cured Pipe Relining eliminates this problem, which means there will be no impact on those areas where it matters most, such as lawns and garden beds, under driveways or close to pools. In a similar vein, the equipment used during UV curing is lightweight and easily portable – another key advantage for those tricky spots.

Unlike traditional methods, UV pipe curing does not produce gases which workers and residents need to be protected from. The odour and impact of the heated resin used to coat the pipes is minimized by the fully-encapsulated lining, which provides a seal which limits potential harm. Also, there is no opportunity for the resin to migrate into the sewer system and, because UV curing does not rely on heat, the effects of the resins are further minimised. There’s no concern about causing damage to existing PVC pipe with the excess heat that’s used in other methods.The stronger but thinner material allows minimal impact on the existing sewer capacity. The high-strength fiberglass properties result in thinner pipe walls which require less resin and provide greater hydraulic capacity.